March 18, 2016
The announcement was made by my old mate Ramin Younessi, vice president of Caterpillar’s Industrial Power Systems division.
“Remaining a viable competitor in this market would require significant additional investment to develop and launch a complete portfolio of trucks, and upon an updated review, we determined there was not a sufficient market opportunity to justify the investment,” he said. “We have not yet started truck production in Victoria [Texas], and this decision allows us to exit this business before the transition occurs.”
It comes as little surprise for, despite the undoubted quality of the Cat CT models, they have been very slow to sell. Caterpillar launched the three-model vocational truck range in the North American market in 2011, working with Navistar on design and manufacture and using the ill-fated MaxxForce 13, 12.4-liter engine.
It was based on the International PayStar and built under contract by Navistar at its Garland, Texas, facility. It moved to Saltillo, Mexico with Navistar, then it was to move again to a Cat plant in Victoria this year.
Production never really got into gear. Supposedly the line was running at 1100 to 1200 units annually, around four per day. This is in sharp contrast to mainstream truck manufacturers who look for 100 units per day.
A further nail in the CT coffin was recently driven with the launch of Navistar’s new HX replacement for the Paystar, which added to the bleak future for CT sales.
Incidentally, I've known Younessi, since the launch of the Freightliner Coronado in early 2001. Coronado was a personal project of Jim Hebe’s when he was president of the company. Younessi was a get-things-done engineer back then and later became a blue-sky strategist for Daimler Trucks in Stuttgart. I actually bumped into him when boarding a plane in Germany as we were flying back from the IAA Show and we caught up. He was briefly back in Portland as chief engineer but left for a senior engineering role at Navistar. On one memorable occasion, we took a pair of the huge, truck-based International CXT pickups on the famous Detroit annual cruise on Woodward Avenue. Those trucks were the darlings of the crowd.
A casualty of the MaxxForce debacle, Younessi moved to Caterpillar most recently and is now a vice president.
Posted by Steve Sturgess at 8:44 AM
March 15, 2016
This looks to be one.
Weego is a manufacturer of portable jump starters and rechargeable battery packs and has a number of accessory devices designed to increase the versatility of its Jump Starter Battery+ models. This one saves the electronic presets on the vehicle controller.
Intended for the car diy enthusiast, the device will save things like radio and clock settings, seat positions, alarms, climate control, GPS, and keyless entry codes that are lost when you disconnect the vehicle battery.
Called the OBDII 12V Memory Saver, it simply attaches to the vehicle’s OBDII port. With the other end of the cable connected to the 12V/10A output in one of Weego’s jump starters, it maintains power to the ECU so the presets are retained when the vehicle power is cut when the vehicle battery is disconnected for whatever reason.
And while Weego will happily sell you a jump starter, the OBDII memory unit can be powered by any portable supply that has a 12V, 5.5 mm barrel jack output.
At $19.99, it is not expensive and I’m thinking, well worth a spot in your tool chest. You can likely find it in the local car parts store or, failing that, an Internet search should turn it up for purchase on-line.
Posted by Steve Sturgess at 3:18 PM